Arduino Car Alternator to Brushless Motor conversion

 Arduino Car Alternator to Brushless Motor conversion 

Below is the simple Arduino control car alternator working as a powrfull motor 

Here simple ESC 30 Amps were used 

1). Need 12VDC connected to the internal coil of alternator first

2). 12VDC also need to be  connected to ESC 

3). Arduino will get 5V from the ESC buit-in 5VDC output

4). ESC connected to arduino  pin # 8

5). 10 K resistor connected to  arduino A0

https://web.facebook.com/ksfelectronics

servo esc;    

void setup()

{

esc.attach(8); 

esc.writeMicroseconds(1000); 

}

void loop(){

int val;                           

val= analogRead(A0);   

val= map(val, 0, 1023,1000,2000);                                                          

esc.writeMicroseconds(val);      

}

Check the video:

https://www.youtube.com/watch?v=LzQ_vyZUGTU